砂塵試驗箱又名防塵試驗機、砂塵測試箱、防塵實驗機、耐塵實驗機、外殼防塵試驗箱主要用于對電子、家用電器、電工、汽車燈具、汽車配件、摩托車、化工及其他零部件及材料進行防塵試驗，從而檢測產品的外殼密封性能，滿足GB4208-93外殼防護等級IP5X/IP6X防塵試驗。砂塵試驗箱主要是模擬沙塵暴天氣對鎖具、汽摩零部件、密封件、電力儀表燈產品所造成的破壞。

  砂塵試驗箱用以確定設備防御塵埃料滲透效應的能力。試驗程序如下：
  沙塵試驗箱初始檢測：按GJB150.1－86中3.5.2條款要求進行。
  試驗樣品在試驗箱(室)中的安裝：按GJB150.1－86中3.5.3款和有關標準規定的安裝方向進行，應使試驗樣品的zui關鍵、zui薄弱的表面朝向砂塵氣流方向。如有規定，試驗時可以按規定改變試驗樣品的方向。
  防塵試驗箱試驗：控制試驗箱(室)內溫度為23℃，相對濕度小于30%，調節風速為8.9±1.2m/s，調整塵粒辦輸入量，使吹粉塵濃度為1.06±7m/ s3，保持上述條件6h。停止輸入塵粒，并將風速調節到1.5±1m/s，試驗箱(室)內溫度升高到60℃或設備zui高工作溫度，升溫速率小于10℃/min，保持上述條件16h或試驗樣品達到溫度穩定所需的時間。保持試驗箱(室)內溫度為60℃或設備zui高工作溫度,調節風速為8.9±1.2m/s,繼續輸入塵粒，控制吹粉塵濃度為10.6±7g/m3，如無其它規定，保持上述條件6h。
  砂塵防護試驗箱試驗恢復：試驗箱(室)停止工作,使試驗箱(室)內條件恢復到正常的試驗大氣條件。取出試驗樣品，抖掉或用刷子掉積聚在試驗樣品上的塵粒，注意避免其他砂塵再落到試驗樣品上，不能用吹風機或真空吸塵器清除試驗樣品上的塵粒。
  試驗zui后檢測：按GJB150.1－3.5.7款要求進行。在外觀檢查時，應注意檢查試驗樣品的軸承、油脂密封處、潤滑部位等是否有塵粒積聚、積聚部位和積聚量。然后，按GJB150、1－86中3.5.8款要求評定試驗結果。

  東莞市科文試驗設備有限公司主營產品：
  一、環境試驗箱：濕熱老化試驗箱、可程式恒溫恒濕試驗箱、小型恒溫恒濕試驗箱、高低溫交變濕熱試驗箱、高低溫老化箱、高溫烤箱、電熱鼓風干燥箱、冷熱沖擊試驗箱、砂塵試驗箱、淋雨試驗箱、氙燈耐氣候試驗箱、紫外線老化試驗箱、老化房、鹽霧腐蝕試驗箱檢測設備等產品，并竭誠為廣大用戶研制特殊方案的試驗設備。

  二、可靠性測試設備：振動試驗機、電磁振動試驗臺、插拔壽命試驗機、跌落試驗機、手機振動耐磨試驗機、材料試驗機、拉力試驗機、按鍵壽命試驗機、酒精橡皮耐磨試驗機、插拔力試驗機、端子插拔壽命試驗機、紙帶摩擦壽命試驗機、手機抗扭曲試驗機、手機微跌落試驗機、零跌落試驗機、落球沖擊試驗機、懸臂梁沖擊試驗機等力學檢測設備。

尊敬的客戶，科文以專業的技術，精致的加工工藝，細致的裝配，詳細的品質檢驗為客戶提供良好的產品。歡迎科文了解并探討更多試驗設備技術知識。